Lay out the circuits and review the connected load before detailed design.
Sample distribution one-line
Use this example to see how the equipment fits together. Replace the example ratings with your equipment data for your project.
- Service source480 V, three-phase
- Switchboard SWBD-1480 V main distribution
- Transformer T1480 V to 208Y/120 V
- Panelboard LP-1208Y/120 V branch distribution
- Long feeder F1300 ft one-way example
- Motor M1208 V, three-phase
What to study
- Panelboard — Enter phase-to-neutral loads in the workspace below to check connected VA by phase.
- Transformer and switchboard — Gather transformer kVA and impedance, switchboard ratings, and available source fault current for load and fault-duty studies.
- Long feeder — Gather one-way length, conductor material and size, wiring method, and load current for voltage drop and ampacity.
- Motor — Gather nameplate voltage, horsepower, full-load current, starting method, and starting current for steady-state and starting studies.
Download the switchboard-to-motor project ·
Open the load-flow and feeder-outage results
Review the 300 ft feeder
Run the saved file with python project.py voltage-drop ElectraGrid-feeder.json.
Open running and starting voltage-drop results ·
Compare ampacity and drop checks · Download the candidate comparison CSV
The feeder reports use synthetic cable inputs and limits to demonstrate the study workflow.
Run the motor-start example
Synthetic motor start against a 3.90 s test limit| Model | Time to target | Result |
|---|
| Fixed starting voltage | 4.06 s | Exceeds test limit |
|---|
| Speed-dependent impedance | 3.76 s | Within test limit |
|---|
Open the deadline comparison inputs and results
Download the motor-start project ·
Open motor-start results
Place the project in the extracted release folder and run python project.py motor-start panel-motor-start-project.json.
This example calculates the starting terminal voltage from the feeder model, then holds that voltage constant during acceleration.
For voltage and current at multiple speeds, download the speed-dependent project or open the speed profile CSV. Run python project.py motor-start panel-motor-speed-project.json --output speed.csv to reproduce it.
The study file uses assumed per-unit impedances. The illustrated 300 ft route does not determine the study impedance.
Open study examples · Create the terminal drawing